ONLINE ONLY
The Zanussi 392277 is an induction cooktop with a 400 mm-wide format. Its cooking surface supports everyday pot and pan preparation.
With dimensions of 400 × 900 × 250 mm (W × D × H), this model can be assessed against the space available in your kitchen. Its specified electrical load is 10 kW with a 3-phase plus neutral supply.
Product Features
- Electric Induction 400mm 2 Zone Cooking Top
- EVO 900 series
- Pots diameter to be used : min 12cm, max 28 cm in order to obtain maximum heating efficiency.
- Suitable for countertop installation.
- Glass ceramic cooking surface with 2 independently controlled induction zones with a power of 5 kW per zone.
- Almost the entire surface of the ceramic plate can be used without “dead” spots.
- One indicating lamp for each zone located on control console.
- Induction plates endowed with overheating safety device.
- Power to the individual zones can be set with progressive output i.e. fine regulation at the lower and larger progress at the upper levels.
- Low heat dissipation to the kitchen.
- The smooth, glass ceramic plate is not directly heated, so there is no burning on cooking surface.
- IPX5 water protection.
- Unit is 900mm deep to give a larger working surface area.
- All exterior panels in Stainless Steel with Scotch Brite finishing.
- AISI 304 stainless steel worktop, 2mm thick.
- Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
Specifications
| Model | 392277 |
|---|---|
| Dimensions (W × D × H) | 400 × 900 × 250 mm |
| Unit weight | 45 kg |
| Electrical output | 10 kW |
| Current | 14.4 A |
| Phase | 3N |
| Packed dimensions (W × D × H) | 500 × 1020 × 520 mm |
| Packed weight | 45 kg |
| Warranty | 2 years via registration |
The Zanussi 392277 is an induction cooktop with a 400 mm-wide format. Its cooking surface supports everyday pot and pan preparation.
With dimensions of 400 × 900 × 250 mm (W × D × H), this model can be assessed against the space available in your kitchen. Its specified electrical load is 10 kW with a 3-phase plus neutral supply.
Product Features
- Electric Induction 400mm 2 Zone Cooking Top
- EVO 900 series
- Pots diameter to be used : min 12cm, max 28 cm in order to obtain maximum heating efficiency.
- Suitable for countertop installation.
- Glass ceramic cooking surface with 2 independently controlled induction zones with a power of 5 kW per zone.
- Almost the entire surface of the ceramic plate can be used without “dead” spots.
- One indicating lamp for each zone located on control console.
- Induction plates endowed with overheating safety device.
- Power to the individual zones can be set with progressive output i.e. fine regulation at the lower and larger progress at the upper levels.
- Low heat dissipation to the kitchen.
- The smooth, glass ceramic plate is not directly heated, so there is no burning on cooking surface.
- IPX5 water protection.
- Unit is 900mm deep to give a larger working surface area.
- All exterior panels in Stainless Steel with Scotch Brite finishing.
- AISI 304 stainless steel worktop, 2mm thick.
- Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
Specifications
| Model | 392277 |
|---|---|
| Dimensions (W × D × H) | 400 × 900 × 250 mm |
| Unit weight | 45 kg |
| Electrical output | 10 kW |
| Current | 14.4 A |
| Phase | 3N |
| Packed dimensions (W × D × H) | 500 × 1020 × 520 mm |
| Packed weight | 45 kg |
| Warranty | 2 years via registration |
