Zanussi Gas 400mm 2 Open Burner 36mj Boiling Top - 392001

Gas Cooktop

The Zanussi 392001 is a gas cooktop with a 400 mm-wide format. Its cooking surface supports everyday pot and pan preparation.With dimensions of 400 × 900 × 250 mm (W × D × H), this model can be assessed against...

$3,483.07
$3,831.37 inc gst
rent-try-buy
3,483.07 ex GST /Wk*
Based on 12mth Contract
  • Category : All, Commercial Cooking Equipment, Commercial Gas Cooktops

The Zanussi 392001 is a gas cooktop with a 400 mm-wide format. Its cooking surface supports everyday pot and pan preparation.

With dimensions of 400 × 900 × 250 mm (W × D × H), this model can be assessed against the space available in your kitchen. Check the required gas configuration and installation clearances when planning your equipment layout.

Product Features

  • Gas 400mm 2 Open Burner 36mj Boiling Top
  • EVO 900 series
  • Control knobs provide smooth, continuous rotation from min to max power level.
  • Suitable for countertop installation.
  • Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
  • The two 10 kW high efficiency burners are available in two different sizes to suit high performing cooking requirements of the most demanding customers.
  • 60 mm burners with continuous power regulation from 1,5 to 6 kW
  • 100 mm burners with continuous power regulation from 2.2 kW to 10 kW
  • Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
  • Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
  • Burners with optimized combustion.
  • Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
  • Protected pilot light.
  • The special design of the control knob system guarantees against water infiltration.
  • IPX5 water protection.
  • Pan supports in stainless steel.
  • Unit is 900mm deep to give a larger working surface area.
  • All exterior panels in Stainless Steel with Scotch Brite finishing.
  • AISI 304 stainless steel worktop, 2mm thick.
  • Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.

Specifications

Model 392001
Dimensions (W × D × H) 400 × 900 × 250 mm
Unit weight 34 kg
Phase N/A
Gas input 72 MJ/h
Packed dimensions (W × D × H) 460 × 1020 × 520 mm
Packed weight 34 kg
Warranty 2 years via registration

The Zanussi 392001 is a gas cooktop with a 400 mm-wide format. Its cooking surface supports everyday pot and pan preparation.

With dimensions of 400 × 900 × 250 mm (W × D × H), this model can be assessed against the space available in your kitchen. Check the required gas configuration and installation clearances when planning your equipment layout.

Product Features

  • Gas 400mm 2 Open Burner 36mj Boiling Top
  • EVO 900 series
  • Control knobs provide smooth, continuous rotation from min to max power level.
  • Suitable for countertop installation.
  • Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
  • The two 10 kW high efficiency burners are available in two different sizes to suit high performing cooking requirements of the most demanding customers.
  • 60 mm burners with continuous power regulation from 1,5 to 6 kW
  • 100 mm burners with continuous power regulation from 2.2 kW to 10 kW
  • Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
  • Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
  • Burners with optimized combustion.
  • Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
  • Protected pilot light.
  • The special design of the control knob system guarantees against water infiltration.
  • IPX5 water protection.
  • Pan supports in stainless steel.
  • Unit is 900mm deep to give a larger working surface area.
  • All exterior panels in Stainless Steel with Scotch Brite finishing.
  • AISI 304 stainless steel worktop, 2mm thick.
  • Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.

Specifications

Model 392001
Dimensions (W × D × H) 400 × 900 × 250 mm
Unit weight 34 kg
Phase N/A
Gas input 72 MJ/h
Packed dimensions (W × D × H) 460 × 1020 × 520 mm
Packed weight 34 kg
Warranty 2 years via registration